Match Ipv6 Next-Hop - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

match ipv6 next-hop

match ipv6 next-hop
Syntax
{ accessListName [ accessListName ]* | prefix-list prefixListName
[ prefixListName ]* }
no match ipv6 next-hop [ [ accessListName ]* | prefix-list [ prefixListName ]* ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches any routes that have a next-hop router address passed by the specified
Description
access list or prefix list. The no version removes all next-hop match clauses from a
route map unless you specify either an access list or prefix list, in which case only
the list match is removed from the route map.
Options
Policy List Configuration, Route Map Configuration
Mode
accessListName—String of up to 32 alphanumeric characters
prefixListName—Name of a single prefix list; string of up to 32 characters
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Chapter 13: M Commands
1265
match ipv6 next-hop