Ip Dhcp-Local Auto-Configure Agent-Circuit-Identifier - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip dhcp-local auto-configure agent-circuit-identifier

[ no ] ip dhcp-local auto-configure agent-circuit-identifier
Syntax
Command introduced in JUNOSe Release 7.3.0.
Release Information
Configures the DHCP local server to support the creation of dynamic subscriber
Description
interfaces built over dynamic VLANs that are based on the agent-circuit-id option
(suboption 1) of the option 82 field in DHCP messages. This command is specific to
a virtual router. The no version disables the autoconfigure feature.
Global Configuration
Mode
754
ip dhcp-local auto-configure agent-circuit-identifier