Set Dhcp Relay Agent Sub-Option - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

set dhcp relay agent sub-option

set dhcp relay agent sub-option { circuit-id | remote-id | vendor-specific
Syntax
{ layer2-circuit-id | user-packet-class } }
no set dhcp relay agent sub-option { circuit-id | remote-id | vendor-specific
[ layer2-circuit-id | user-packet-class ] }
Command introduced in JUNOSe Release 8.0.0.
Release Information
Configures DHCP relay and DHCP relay proxy to add values into the DHCP relay
Description
agent information option (option 82) of the packets sent to a DHCP server. The no
version restores the default configuration, in which the specified values are not
relayed to the DHCP server.
NOTE: We recommend that you use this command for new option 82 suboption
configurations. However, JUNOSe software continues to support the set dhcp relay
agent command, with option 82 suboptions, to provide backward-compatibility for
existing scripts.
Options
Global Configuration
Mode
476
set dhcp relay agent sub-option
circuit-id Specifies the Agent Circuit ID suboption (suboption 1)
remote-id Specifies the Agent Remote ID suboption (suboption 2)
vendor-specific Specifies the Vendor-Specific suboption (suboption 9)
layer2-circuit-id Specifies the SVLAN ID or VLAN ID or both for Ethernet
interfaces or the VPI/VCI for ATM 1483 interfaces
user-packet-class Specifies the user packet class, whose value is configured by
the JUNOSe software layer 2 policy application