Ip Dhcp-Local Auto-Configure Agent-Circuit-Identifier - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip dhcp-local auto-configure agent-circuit-identifier

Syntax
Release Information
Description
Mode
766
[ no ] ip dhcp-local auto-configure agent-circuit-identifier
Command introduced in JunosE Release 7.3.0.
Configures the DHCP local server to support the creation of dynamic subscriber interfaces
built over dynamic VLANs that are based on the agent-circuit-id option (suboption 1) of
the option 82 field in DHCP messages. This command is specific to a virtual router. The
no version disables the autoconfigure feature.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.