Ipv6 Ospf Mtu-Ignore - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipv6 ospf mtu-ignore

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ipv6 ospf [ processId ] mtu-ignore
Command introduced before JunosE Release 7.1.0.
Specifies that the interface ignore the MTU size contained in the DBD packet. The interface
accepts data description packets from its neighbor even if it has a different a MTU size.
However, the MTU size must be less than 18000. The no version resets the default; that
the neighbor MTU size must match the MTU size of the OSPFv3 interface from which
the packet is received.
processId—Integer in the range 1–65535
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
1079