Display Ipv6 Relay-Route - H3C S7500E Series Command Manual

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Field
deleted
freed
Total

1.1.9 display ipv6 relay-route

Syntax
display ipv6 relay-route
View
Any view
Parameters
None
Description
Use the display ipv6 relay-route command to display IPv6 recursive route
information.
Examples
# Display IPv6 recursive route information.
<Sysname> display ipv6 relay-route
Total Number of relay-route is: 1
Dest/Mask: 192::1/64
Related instance id(always 0): 0(1)
Table 1-7 Description on the fields of the display ipv6 relay-route command
Total Number of Relay-route
Dest/Mask
Related instance id(always 0)
Number of routes marked as deleted, which will be freed after a period.
Number of routes that got freed, that is, got removed permanently
Sums for the numerical items above
Field
Total number of recursive routes
Destination address/mask of the recursive route
IPv6 supports public networks only. Therefore, the
instance ID can be 0 only.
The number in the parentheses after the instance
ID indicates the number of routes that have used
the recursive route in the routing table.
1-16
Chapter 1 Routing Overview Commands
Description
Description