Display Ipv6 Statistics - H3C s3100 series Command Manual

Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display all IPv6 static binding entries configured.
<Sysname> display ipv6 source static binding
Type IP Address
==== ========================= =============== ==== ===== =================
S 2001::1
S 1::1
S 1::2
--- 3 static binding item(s) found

display ipv6 statistics

Syntax
display ipv6 statistics
View
Any view
Parameters
None
Description
Use the display ipv6 statistics command to display statistics of IPv6 packets and ICMPv6 packets.
You can use the reset ipv6 statistics command to clear all IPv6 and ICMPv6 packet statistics.
Examples
# View the statistics of IPv6 packets and IPv6 ICMP packets.
<Sysname> display ipv6 statistics
IPv6 Protocol:
Sent packets:
Total:
Local sent out:
raw packets:
routing failed:
fragments failed:
Received packets:
Total:
local host:
format error:
protocol error:
MAC Address
0001-0203-0406
0015-e20f-0101
0001-0001-0001
580
550
30
0
0
572
572
0
0
VLAN State Interface
---- True Ethernet1/0/2
---- True Ethernet1/0/3
---- True Ethernet1/0/2
---
forwarded:
discarded:
fragments:
hopcount exceeded:
option error:
fragments:
1-18
0
0
0
0
0
0