Display Lldp Tlv-Config - H3C MSR Series Command Reference Manual

Admin status
Trap flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of sent optional TLV
Number of received unknown TLV : 5
Table 31 Command output
Field
Global status of LLDP
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1
Port status of LLDP
Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of sent optional TLV
Number of received unknown TLV

display lldp tlv-config

Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
: Tx_Rx
: No
: 0s
: 5
: 2
: 12
Description
Indicates whether LLDP is globally enabled.
Time when the neighbor information was last updated.
LLDPDU transmit interval.
TTL multiplier.
LLDP re-initialization delay.
LLDPDU transmit delay.
Trap transmit interval.
Number of the LLDPDUs sent each time fast LLDPDU transmission is
triggered.
LLDP status of port 1.
Indicates whether LLDP is enabled on the port.
LLDP mode of the port:
•
TxRx—The port can send and receive LLDPDUs.
•
Rx_Only—The port can only receive LLDPDUs.
•
Tx_Only—The port can only send LLDPDUs.
•
Disable—The port cannot send or receive LLDPDUs.
Indicates whether trapping is enabled.
LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of LLDP neighbors connecting to the port.
Number of MED neighbors connecting to the port.
Number of optional TLVs contained in an LLDPDU sent through the
port.
Number of unknown TLVs contained in all received LLDPDUs.
138