Display Lldp Tlv-Config - H3C S7500E Series Command Reference Manual

Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV

display lldp tlv-config

Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display lldp tlv-config command to display the types of advertisable optional LLDP TLVs of a
port.
Field
LLDP mode of the port, which can be:
Indicates whether trap is enabled.
LLDP polling interval. A value of 0 indicates LLDP polling is disabled.
Number of the LLDP neighbors connecting to the port
Number of MED neighbors connecting to the port
Number of the CDP neighbors connecting to the port
Number of the optional TLVs contained in an LLDPDU sent through the
port
Number of the unknown TLVs contained in a received LLDPDU
TxRx. A port in this mode sends and receives LLDPDUs.
Rx_Only. A port in this mode receives LLDPDUs only.
Tx_Only. A port in this mode sends LLDPDUs only.
Disable. A port in this mode does not send or receive LLDPDUs.
20-15
Description