Ipv6 Nd Suppress-Ra - Allied Telesis AT-x510-28GTX Command Reference Manual

IP 6 C
V OMMANDS
6 -
IPV ND SUPPRESS RA

ipv6 nd suppress-ra

Overview Use this command to inhibit IPv6 Router Advertisement (RA) transmission for the
current interface. Router advertisements are used when applying IPv6 stateless
auto-configuration.
Use no parameter with this command to enable Router Advertisement
transmission.
ipv6 nd suppress-ra
Syntax
no ipv6 nd suppress-ra
Default Router Advertisement (RA) transmission is suppressed by default.
Mode Interface Configuration for a VLAN interface.
Example To enable the transmission of router advertisements from the VLAN interface
vlan4 on the device, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 nd ra-interval
Commands
ipv6 nd prefix
C613-50102-01 REV C
configure terminal
interface vlan4
no ipv6 nd suppress-ra
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
783