Ipv6 Nd Suppress-Ra - Allied Telesis IE340 Series Command Reference Manual

IP 6 C
V OMMANDS
6 -
IPV ND SUPPRESS RA

ipv6 nd suppress-ra

Overview Use this command to inhibit IPv6 Router Advertisement (RA) transmission for the
current interface. Router advertisements are used when applying IPv6 stateless
auto-configuration.
Use the no parameter with this command to enable Router Advertisement
transmission.
ipv6 nd suppress-ra
Syntax
no ipv6 nd suppress-ra
Default Router Advertisement (RA) transmission is suppressed by default.
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Example To enable the transmission of router advertisements from vlan2 on the device, use
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 nd ra-interval
commands
ipv6 nd router-preference
ipv6 nd prefix
C613-50631-01 Rev A
configure terminal
interface vlan2
no ipv6 nd suppress-ra
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
984