Hardware Reference
Environmental
conditions
Regulatory
standards
Switching core
Processing core
Optional IPv6
accelerator card
Software Release 3.0.2
C613-03092-00 REV C
AT-8900 Series Switch
The AT-8948 switch is the sole model in the AT-8900 Series and meets the
exceptionally high performance demands of high-end applications. It delivers
wire-speed switching performance in a robust 1U rack mount platform.
Operating temperature range: 0ºC to 50º C (32 to 122ºF)
■
Storage temperature range: -25ºC to 70ºC (-13 to 158ºF)
■
Relative humidity range for operation: 5 to 80% non-condensing
■
Relative humidity range for storage: 5 to 95% non-condensing
■
Operational altitude: 3,050 metres maximum (10,000 feet)
■
EMC: EN55022 class A, FCC class A, and VCCI class A
■
Immunity: EN55024, EN61000-3 levels 2 (Harmonics), and 3 (Flicker)—
■
AC models only
Safety: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950,
■
AS/NZS60950, and EN60825-1
Certification: UL, cUL, and TUV
■
Application-Specific Integrated Circuit (ASIC) switch chip
■
Non-blocking Layer 2 and Layer 3 IP switching
■
256 K IPv4 address table
■
4K multicast table
■
4K logical Layer 3 interfaces
■
Shared 32 Mbyte DDR-SDRAM packet buffer
■
350 MHz RISC Processor
■
128 MBytes of Synchronous DRAM, expandable to 256 MBytes or
■
512 MBytes with DIMM
32MBytes of fixed flash
■
CompactFlash slot for hot-swappable expansion of flash memory up to
■
128 MBytes
512 kBytes of SRAM
■
32/66 PCI bus for 32-bit/33MHz
■
Silicon ID chip storing serial number, board ID, and MAC address
■
Slot for network processor accelerator card that provides accelerated IPv6
■
unicast and multicast routing in hardware
•
4 K multicast table
•
1000 accelerator hardware filters
•
128 MBytes Synchronous DRAM giving 64K IPv6 routes
5