Show Flowcontrol Interface - Allied Telesis AT-IX5-28GPX Manual

S C
WITCHING OMMANDS

SHOW FLOWCONTROL INTERFACE

show flowcontrol interface
Overview Use this command to display flow control information.
Syntax
show flowcontrol interface <port>
Mode User Exec and Privileged Exec
Example To display the flow control for the port1.0.5, use the command:
awplus#
Output Figure 10-1: Example output from the show flowcontrol interface command
Port Send FlowControl
admin
----- ------- --------
port1.0.5 on
382 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Specifies the name of the port to be displayed.
<port>
show flowcontrol interface port1.0.5
for a specific interface
Receive
oper admin
------- --------
on on
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FlowControl RxPause TxPause
oper
------- -------
on 0 0
C613-50057-01 REV A