Show Flowcontrol Interface - Allied Telesis x510-28GTX Command Reference Manual

S C
WITCHING OMMANDS

SHOW FLOWCONTROL INTERFACE

show flowcontrol interface
Overview Use this command to display flow control information.
show flowcontrol interface <port>
Syntax
Mode User Exec and Privileged Exec
To display the flow control for the port1.0.5, use the command:
Example
awplus#
Output Figure 15-1: Example output from the show flowcontrol interface command
Port Send FlowControl
admin
----- ------- --------
port1.0.5 on
C613-50170-01 Rev B
Parameter Description
<port>
Specifies the name of the port to be displayed.
show flowcontrol interface port1.0.5
for a specific interface
Receive
oper admin
------- --------
on on
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
FlowControl RxPause TxPause
oper
------- -------
on 0 0
538