Show Flowcontrol Interface - Allied Telesis IE340 Series Command Reference Manual

S C
WITCHING OMMANDS

SHOW FLOWCONTROL INTERFACE

show flowcontrol interface
Overview Use this command to display flow control information.
show flowcontrol interface <port>
Syntax
Mode User Exec and Privileged Exec
Example To display the flow control for port1.0.3, use the command:
awplus#
Output Figure 15-1: Example output from the show flowcontrol interface command
C613-50631-01 Rev A
Parameter Description
<port>
Specifies the name of the port to be displayed.
show flowcontrol interface port1.0.3
for a specific interface
Port Send FlowControl
admin oper
----- ------- --------
port1.0.3 on
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Receive
admin
------- --------
on on
FlowControl RxPause TxPause
oper
------- -------
on 0 0
599