Default Log Host - Allied Telesis IE340 Series Command Reference Manual

L C
OGGING OMMANDS

DEFAULT LOG HOST

default log host
Overview This command restores the default settings for log sent to a remote syslog server.
By default no filters are defined for remote syslog servers. Filters must be defined
before messages will be sent. This command also restores the remote syslog server
time offset value to local (no offset).
default log host <ip-addr>
Syntax
Mode Global Configuration
Example To restore the default settings for messages sent to the remote syslog server with
IP address 10.32.16.21 use the following commands:
awplus#
awplus(config)#
Related log host
commands
log host (filter)
log host exclude
log host source
log host time
show log config
C613-50631-01 Rev A
Parameter Description
<ip-addr>
The IP address of a remote syslog server
configure terminal
default log host 10.32.16.21
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
415