Table of Contents
Advertisement
L
C
OGGING
OMMANDS
DEFAULT LOG HOST
default log host
Overview
This command restores the default settings for log sent to a remote syslog server.
By default no filters are defined for remote syslog servers. Filters must be defined
before messages will be sent. This command also restores the remote syslog server
time offset value to local (no offset).
default log host <ip-addr>
Syntax
Mode
Global Configuration
Example
To restore the default settings for messages sent to the remote syslog server with
IP address 10.32.16.21 use the following commands:
awplus#
awplus(config)#
Related
log host
commands
log host (filter)
log host exclude
log host source
log host time
show log config
C613-50644-01 Rev B
Parameter
Description
<ip-addr>
The IP address of a remote syslog server
configure terminal
default log host 10.32.16.21
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
372
Advertisement
Table of Contents
