L
C
OGGING
OMMANDS
DEFAULT LOG HOST
default log host
Overview
This command restores the default settings for log sent to a remote syslog server.
By default no filters are defined for remote syslog servers. Filters must be defined
before messages will be sent. This command also restores the remote syslog server
time offset value to local (no offset).
Syntax
default log host <ip-addr>
Mode
Global Configuration
Example
To restore the default settings for messages sent to the remote syslog server with
IP address 10.32.16.21 use the following commands:
awplus#
awplus(config)#
Validation
show log config
Commands
Related
log email
Commands
C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
Description
The IP address of a remote syslog server
<ip-addr>
configure terminal
default log host 10.32.16.21
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
279