Show Running-Config - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW RUNNING CONFIG

show running-config

Overview This command displays the current configuration of your device. Its output
includes all non-default configuration. The default settings are not displayed.
NOTE
•
•
•
show running-config [full|<feature>]
Syntax
613-50157-01 Rev C
C
OMMANDS
: You can control the output by entering | or > at the end of the command:
To display only lines that contain a particular word, enter:
| include <word>
To start the display at the first line that contains a particular word, enter:
| begin <word>
To save the output to a file, enter:
> <filename>
Parameter Description
full
Display the running-config for all features. This is the default setting, so
it is the same as entering show running-config.
<feature>
Display only the configuration for a single feature. The features
available depend on your device and will be some of the following list:
access-list
antivirus
application
as-path
as-path access-list
atmf
bgp
community-list
crypto
dhcp
dpi
entity
firewall
interface
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
ACL configuration
Antivirus configuration
Application configuration
Autonomous system path filter
configuration
Configuration of ACLs for AS path filtering
Allied Telesis Management Framework
configuration
Border Gateway Protocol (BGP)
configuration
Community-list configuration
Security-specific configuration
DHCP configuration
Deep Packet Inspection configuration
Entity configuration
Firewall configuration
Interface configuration. See
running-config interface
options.
show
for further
113