Show Running-Config - Allied Telesis x310-26FT Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW RUNNING CONFIG

show running-config

Overview This command displays the current configuration of your device. Its output
includes all non-default configuration. The default settings are not displayed.
You can control the output in the following ways:
•
•
•
Syntax show running-config
Mode Privileged Exec and Global Configuration
Example To display the current configuration of your device, use the command:
awplus#
C613-50103-01 REV A
C
OMMANDS
To display only lines that contain a particular word, enter the following
parameters after the command:
| include <word>
To start the display at the first line that contains a particular word, enter the
following parameters after the command:
| begin <word>
To save the output to a file, enter the following parameters after the
command:
> <filename>
show running-config [<feature>|full]
Parameter Description
<feature>
Display only the configuration for a single feature. The features
available depend on your device and will be some of the following list:
access-list
antivirus
application
as-path
as-path access-list
atmf
bgp
community-list
crypto
dhcp
dpi
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ACL configuration
Antivirus configuration
Application configuration
Autonomous system path filter
configuration
Configuration of ACLs for AS path filtering
Allied Telesis Management Framework
configuration
Border Gateway Protocol (BGP)
configuration
Community-list configuration
Security-specific configuration
DHCP configuration
Deep Packet Inspection configuration
139