Show Running-Config Ipv6 Route - Allied Telesis AT-IX5-28GPX Manual

F M C
ILE ANAGEMENT OMMANDS
- 6
SHOW RUNNING CONFIG IPV ROUTE

show running-config ipv6 route

Overview Use this command to show the running system static IPv6 route configuration.
For information on filtering and saving command output, see "Controlling "show"
Command Output" of the
and Configuration
Syntax
show running-config ipv6 route
Mode Privileged Exec and Global Configuration
Example To display the running system static IPv6 route configuration, use the command:
awplus#
Output Figure 3-17: Example output from the show running-config ipv6 route
Related copy running-config
Commands
show running-config
168 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Guide.
show running-config ipv6 route
command
!
ipv6 route 3e11::/64 lo
ipv6 route 3e11::/64 vlan2
ipv6 route fe80::/64 vlan3
!
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
C613-50057-01 REV A