Profile Configuration Mode; Qos Interface Set Configuration Mode; Qos Interface Superset Configuration Mode - Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual

System basics configuration guide software for e series broadband services routers
Table of Contents

Advertisement

JUNOSe 11.1.x System Basics Configuration Guide

Profile Configuration Mode

In this mode, you can configure a profile to subsequently configure dynamic IP
interfaces.
From Global Configuration mode, type the profile command followed by a profile
name of up to 80 characters, and press Enter.
host1(config)#profile germany78
host1(config-profile)#?

QoS Interface Set Configuration Mode

In this mode, you can can configure QoS interface sets.
From Global Configuration mode, type the qos-interface-set command followed by
an interfaceSetName, and press Enter.
host1(config)#qos-interface-set video
host1(config-interface-set)#?
default

QoS Interface Superset Configuration Mode

In this mode, you can configure QoS interface supersets.
110
Accessing Command Modes
service
Configure service-name table entries
sleep
Make the Command Interface pause for a specified duration
default
Set a command to its default(s)
do
Run an exec mode command (alias command run)
exit
Exit from the current command mode
help
Describe the interactive help system
ip
Configure IP characteristics
l2tp
Configure L2TP characteristics
log
Configure logging settings
macro
Run a CLI macro
no
Negate a command or set its default(s)
ppp
Configure PPP parameters
pppoe
Pppoe information
run
Run an exec mode command (alias command do)
sleep
Make the Command Interface pause for a specified duration
Set a command to its default(s)
do
Run an exec mode command (alias command run)
exit
Exit from the current command mode
help
Describe the interactive help system
log
Configure logging settings
macro
Run a CLI macro
member-interface-type
Define the member interface type of the interface set
no
Negate a command or set its default(s)
qos-interface-parent
Select a QoS interface super set as the parent of this
interface.
qos-parameter
Instantiate a QoS parameter for this interface
qos-profile
Attach/Detach a qos-profile
restricted
Define restricted interface
run
Run an exec mode command (alias command do)
sleep
Make the Command Interface pause for a specified
duration

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1

Table of Contents