Setting Terminal Parameters; Powering On The Router - H3C SR8800-F Series Installation Manual

Figure 1 Connecting a console port to a terminal

Setting terminal parameters

To access the device through the console port, you must run a terminal emulator program
(TeraTermPro, PuTTY, or Tera Term) on the configuration terminal. For information about how to use
a terminal emulator program, see the program's user guide.
The following are the required terminal settings:
•
Baud rate—9600.
•
Data bits—8.
•
Stop bits—1.
•
Parity—none.
•
Flow control—none.

Powering on the router

Before powering on the router, verify the following items:
•
The router has been steadily mounted.
•
All the cards have been correctly installed.
•
All the communication cables, fibers, power cords, and grounding cables have been correctly
connected.
•
The input power voltage meets the requirement of the router.
•
The console cable has been correctly connected.
•
The configuration terminal has been started, and the terminal parameters have been
configured.
2