Telnet Server - Allied Telesis IE220 Series Manual

U A C
SER CCESS OMMANDS

TELNET SERVER

telnet server
Overview This command enables the telnet server on the specified TCP port. If the server is
already enabled then it will be restarted on the new port. Changing the port
number does not affect the port used by existing sessions.
telnet server {<1-65535>|default}
Syntax
Mode Global Configuration
Example To enable the telnet server on TCP port 2323, use the following commands:
awplus#
awplus(config)#
Related show telnet
commands
C613-50644-01 Rev B
Parameter Description
<1-65535>
The TCP port to listen on.
default
Use the default TCP port number 23.
configure terminal
telnet server 2323
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
196