Ip Irdp Multicast - Allied Telesis IE220 Series Manual

Industrial ethernet layer 2+ switches, command reference for alliedware plus version 5.5.3-0.x
Table of Contents

Advertisement

IP A
P
DDRESSING AND
ROTOCOL

IP IRDP MULTICAST

ip irdp multicast
Overview
This command configures multicast Router Discovery advertisements on an
interface. The interface sends IRDP advertisements with the all-system multicast
address (224.0.0.1) as the IP destination address.
The no variant of this command configures broadcast Router Discovery
advertisements on an interface. The interface sends IRDP advertisements with the
broadcast address (255.255.255.255) as the IP destination address.
The multicast address is the default IP destination address for Router Discovery
advertisements.
ip irdp multicast
Syntax
no ip irdp multicast
Mode
Interface Configuration for a VLAN interface or a local loopback interface.
To enable multicast Router Discovery advertisements on vlan5, use the following
Examples
commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable broadcast Router Discovery advertisements on vlan5, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related
ip irdp
commands
ip irdp broadcast
show ip irdp interface
C613-50644-01 Rev B
C
OMMANDS
configure terminal
interface vlan5
configure terminal
interface vlan5
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ip irdp multicast
no ip irdp multicast
850

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie220-6ghxIe220-10ghx

Table of Contents