Chapter 24
Multicast Listener Discovery (MLD)
Snooping Commands
"ADD MLDSNOOPING
MCGROUP" on page 430
"DELETE MLDSNOOPING" on
page 432
"DISABLE MLDSNOOPING" on
page 433
"ENABLE MLDSNOOPING" on
page 434
"SET MLDSNOOPING" on
page 435
"SET MLDSNOOPING
MCGROUP" on page 437
"SHOW MLDSNOOPING" on
page 439
Section IV: Security and Traffic Control
The MLD Snooping commands are summarized in Table 50.
Table 50. MLD Snooping Commands
Command
AT-GS900M Series CLI Reference
Description
Adds an IPv6 multicast group for MLD
Snooping.
Deletes a static IPv6 multicast group
address.
Disables MLD Snooping.
Enables MLD Snooping.
Specifies the timeout and changes the
settings of the IPv6 multicast group.
Changes the router ports for the IPv6
multcast group.
Displays the settings and status of MLD
Snooping.
429