Debug Ip Irdp - Allied Telesis IE340 Series Command Reference Manual

IP A P
DDRESSING AND ROTOCOL

DEBUG IP IRDP

debug ip irdp
Overview This command enables debugging of ICMP Router Discovery Protocol (IRDP)
events and messages on your device. IRDP debugging is disabled by default.
The no variant of this command disables IRDP debugging. Negating any packet
debug mode will switch detail off.
Syntax debug ip irdp {event|nsm|receive|send|both|detail|all}
no debug ip irdp {event|nsm|receive|send|both|detail|all}
Default IRDP protocol debugging is disabled by default.
Mode Privileged Exec and Global Configuration
Examples To enable IRDP input packet process debugging, use the following command:
awplus#
To disable all IRDP debugging, use the following command:
awplus#
Related ip irdp
commands
router ip irdp
show ip irdp
undebug ip irdp
C613-50631-01 Rev A
C
OMMANDS
Parameter Description
event
Enables debugging of IRDP events.
nsm
Enables debugging of IRDP processing of NSM messages.
receive
Enables debugging of IRDP input packet processing.
send
Enables debugging of IRDP output packet processing.
both
Enables debugging of both IRDP input and output packet processing.
detail
Enables detailed debugging of both IRDP input and output packet
processing. Note that setting detail also sets both, so if you set detail, the
output will show "packet debugging mode is all". Negating any packet
debug mode will switch detail off.
all
Enables all IRDP debugging types.
debug ip irdp receive
no debug ip irdp all
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
872