Show Spanning-Tree Mst Config - Allied Telesis x310-26FT Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE MST CONFIG

show spanning-tree mst config

Overview Use this command to display MSTP configuration identifier for the device.
show spanning-tree mst config
Syntax
Mode User Exec, Privileged Exec and Interface Configuration
Usage The region name, the revision number, and the digest of the VLAN to MSTI
configuration table must be the same on all devices that are intended to be in the
same MST region.
Example To display MSTP configuration identifier information, enter the command:
awplus#
Output Figure 15-6: Example output from show spanning-tree mst config
Related instance vlan (MSTP)
Commands
region (MSTP)
revision (MSTP)
C613-50103-01 REV A
show spanning-tree mst config
awplus#show spanning-tree mst config
%
% MSTP Configuration Information:
%------------------------------------------------------
% Format Id : 0
% Name : My Name
% Revision Level : 0
% Digest : 0x80DEE46DA92A98CF21C603291B22880A
%------------------------------------------------------
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
549