Show Spanning-Tree Mst Config - Allied Telesis AT-IX5-28GPX Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE MST CONFIG

show spanning-tree mst config

Overview Use this command to display MSTP configuration identifier for the device.
Syntax
show spanning-tree mst config
Mode User Exec, Privileged Exec and Interface Configuration
Usage The region name, the revision number, and the digest of the VLAN to MSTI
configuration table must be the same on all devices that are intended to be in the
same MST region.
Example To display MSTP configuration identifier information, enter the command:
awplus#
Output Figure 12-6: Example output from the show spanning-tree mst config
Related instance vlan (MSTP)
Commands
region (MSTP)
revision (MSTP)
482 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
show spanning-tree mst config
command
awplus#show spanning-tree mst config
%
% MSTP Configuration Information:
%------------------------------------------------------
% Format Id : 0
% Name : My Name
% Revision Level : 0
% Digest : 0x80DEE46DA92A98CF21C603291B22880A
%------------------------------------------------------
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A