Vlan Classifier Activate - Allied Telesis x310-26FT Command Reference Manual

VLAN C
OMMANDS

VLAN CLASSIFIER ACTIVATE

vlan classifier activate
Overview Use this command in Interface Configuration mode to associate a VLAN classifier
group with the switch port.
Use the no variant of this command to remove the VLAN classifier group from the
switch port.
Syntax vlan classifier activate <vlan-class-group-id>
no vlan classifier activate <vlan-class-group-id>
Mode Interface Configuration mode for a switch port or link aggregator.
Usage See the protocol-based VLAN configuration example in the
Overview and Configuration Guide
Example To associate VLAN classifier group 3 with switch port1.0.3, enter the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To remove VLAN classifier group 3 from switch port1.0.3, enter the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show vlan classifier rule
Commands
vlan classifier group
vlan classifier rule ipv4
vlan classifier rule proto
C613-50103-01 REV A
Parameter
<vlan-class-group-id>
configure terminal
interface port1.0.3
configure terminal
interface port1.0.3
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Specify a VLAN classifier group identifier in the range
<1-16>.
for configuration details.
vlan classifier activate 3
no vlan classifier activate 3
VLAN Feature
520