Vlan Type Leds (At-Gs920/8Ps Only); Port Mode Leds - Allied Telesis AT-GS920/16 Installation And User Manual

GS920 Series Gigabit Ehternet Switch Installation and User's Guide
VLAN Type
LEDs
(AT-GS920/8PS
Only)

Port Mode LEDs

When the Ethernet ports are being configured for the port-isolation VLAN
feature, the VLAN Type LEDs indicate their configuration. See Table 6.
LED State
Green ON
VLAN TyPE1
OFF
Green ON
VLAN TyPE2
OFF
Green ON
VLAN TyPE3
OFF
See "Ethernet Port Configuration" on page 84 for the configuration
procedures and more information.
When the Ethernet ports are being configured, the Port Mode LEDs
indicate their configuration. See Table 7, "Port Mode LEDs".
LED
a b
Force MDI ,
Auto-Negotiation
Duplex
Speed
Table 6. VLAN LEDs
In the Operation mode, Type 1 is enabled.
In the Config mode, Type 1 is selected.
In the Operation mode, Type 1 is disabled.
In the Config mode, Type 1 is not selected.
In the Operation mode, Type 2is enabled.
In the Config mode, Type 2is selected.
In the Operation mode, Type 2 is disabled.
In the Config mode, Type 2is not selected.
In the Operation mode, Type 3is enabled.
In the Config mode, Type 3is selected.
In the Operation mode, Type 3 is disabled.
In the Config mode, Type 3 is not selected.
Table 7. Port Mode LEDs
State
Select Enabled - FORCE MDI for
Green ON the highest Ethernet port and fixed
MDI-X for all other Ethernet ports.
OFF Select Auto MDI/MDI-X
Green ON Select Enabled - Auto-Negotiation
OFF Select Disabled - Auto-Negotiation
Green ON Select Full Duplex Mode
OFF Select Half Duplex Mode
Green ON Select 1000M speed
Amber ON Select 100M speed
OFF
Description
Description
Select 10M speed
24