Max-Static-Routes - Allied Telesis AT-DC2552XS/L3 Command Reference Manual

S C M
YSTEM ONFIGURATION AND
- -
MAX STATIC ROUTES

max-static-routes

Overview In version 5.4.5-2.x, this option is not supported on DC2552XS switches.
Use this command to set the maximum number of static routes, excluding FIB
(Forwarding Information Base) routes. Note that FIB routes are set and reset using
max-fib-routes.
Use the no variant of this command to set the maximum number of static routes
to the default of 1000 static routes.
VRF lite
NOTE
command.
max-static-routes <1-1000>
Syntax
no max-static-routes
Default The default number of static routes is the maximum number of static routes (1000).
Mode Global Configuration
Example To reset the maximum number of static routes to the default maximum, use the
command:
awplus#
awplus(config)#
NOTE
Base). Therefore, rejected static routes will not appear in the running config.
Related max-fib-routes
Commands
C613-50079-01 REV A
C
ONITORING OMMANDS
: To set the max-static-routes for a VRF Instance, use the
configure terminal
no max-static-routes
: Static routes are applied before adding routes to the RIB (Routing Information
Command Reference for AT-DC2552XS/L3
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
max-fib-routes (VRF)
252