Max-Static-Routes - Allied Telesis AT-x930-28GTX Command Reference Manual

S C M
YSTEM ONFIGURATION AND
- -
MAX STATIC ROUTES

max-static-routes

Overview Use this command to set the maximum number of static routes, excluding FIB
(Forwarding Information Base) routes.
NOTE
the max-static-routes for a user-defined VRF instance use the
command. For FIB routes use the
and the
Use the no variant of this command to set the maximum number of static routes
to the default of 1000 static routes.
max-static-routes <1-1000>
Syntax
no max-static-routes
Default The default number of static routes is the maximum number of static routes (1000).
Mode Global Configuration
Example To reset the maximum number of static routes to the default maximum, use the
command:
awplus#
awplus(config)#
NOTE
Base). Therefore, rejected static routes will not appear in the running config.
Related max-fib-routes
Commands
C613-50100-01 REV C
C
ONITORING OMMANDS
: When using VRF-lite, this command applies to the Global VRF instance; to set
max-fib-routes (VRF)
configure terminal
no max-static-routes
: Static routes are applied before adding routes to the RIB (Routing Information
Command Reference for x930 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
max-fib-routes command for the Global VRF instance
command for a user-defined VRF instance.
max-static-routes (VRF)
255