Banner Login (System) - Allied Telesis AT-x510-28GTX Command Reference Manual

S C M
YSTEM ONFIGURATION AND
( )
BANNER LOGIN SYSTEM

banner login (system)

Overview This command configures the login banner that is displayed on the console when
you login. The login banner is displayed on all connected terminals. The login
banner is displayed after the MOTD (Message-of-the-Day) banner and before the
login username and password prompts.
Use the no banner login command to disable the login banner.
banner login
Syntax
no banner login
Default By default, no login banner is displayed at console login.
Mode Global Configuration
Examples To configure a login banner of "Authorised users only" to be displayed when you
login, enter the following commands:
To remove the login banner, enter the following commands:
C613-50102-01 REV C
C
ONITORING OMMANDS
awplus#configure terminal

awplus(config)#banner login

Type CNTL/D to finish.

Authorised users only

awplus(config)#exit

awplus#exit

authorised users only

awplus login: manager

Password:

AlliedWare Plus (TM) 5.4.6-1 09/30/16 13:03:59

awplus>
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
220