Banner Login (System) - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND
( )
BANNER LOGIN SYSTEM

banner login (system)

Overview This command configures the login banner that is displayed on the console when
you login. The login banner is displayed on all connected terminals. The login
banner is displayed after the MOTD (Message-of-the-Day) banner and before the
login username and password prompts.
Use the no banner login command to disable the login banner.
Syntax
banner login
no banner login
Default By default, no login banner is displayed at console login.
Mode Global Configuration
Examples To configure a login banner to be displayed when you login, enter the following
commands:
196 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
awplus#configure terminal
awplus(config)#banner login
Type CNTL/D to finish.
authorised users only
awplus(config)#exit
awplus#exit
authorised users only
awplus login: manager
Password:
AlliedWare
Plus (TM) 5.4.5 03/31/14
13:03:59
awplus>
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A