Show Startup-Config - Allied Telesis AT-IX5-28GPX Manual

F M C
ILE ANAGEMENT OMMANDS
-
SHOW STARTUP CONFIG

show startup-config

Overview This command displays the contents of the start-up configuration file, which is the
file that the device runs on start-up.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show startup-config
Mode Privileged Exec
Example To display the contents of the current start-up configuration file, use the
command:
awplus#
Output Figure 3-25: Example output from the show startup-config command
awplus#show startup-config
!
service password-encryption
!
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
!
no service ssh
!
service telnet
!
service http
!
no clock timezone
.
.
.
line con 0
line vty 0 4
!
end
Related boot config-file backup
Commands
copy running-config
copy startup-config
erase startup-config
show boot
176 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
"Getting Started with AlliedWare Plus" Feature Overview
Guide.
show startup-config
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A