Show Startup-Config - Allied Telesis IE220 Series Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW STARTUP CONFIG

show startup-config

Overview This command displays the contents of the start-up configuration file, which is the
file that the device runs on start-up.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show startup-config
Mode Privileged Exec
Example To display the contents of the current start-up configuration file, use the
command:
awplus#
Output Figure 3-13: Example output from the show startup-config command
awplus#show startup-config
!
service password-encryption
!
no banner motd
!
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
!
service ssh
!
no service telnet
!
service http
!
no clock timezone

...

line con 0
line vty 0 4
!
end
Related boot config-file backup
commands
copy running-config
copy startup-config
erase startup-config
show boot
C613-50644-01 Rev B
C
OMMANDS
show startup-config
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
149