Aaa Accounting Default - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

aaa accounting default

aaa accounting { subscriberType } default accountor [ accountor ]*
Syntax
no aaa accounting { subscriberType } default
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the accounting method used for a particular type of subscriber. The no
Description
version produces the same result as specifying the radius value.
Options
Global Configuration
Mode
26
aaa accounting default
subscriberType—Type of subscriber:
atm1483 Specifies ATM 1483 subscribers; not supported
ip Specifies IP subscriber management interfaces
ipsec Specifies IPSec subscribers
ppp Specifies PPP subscribers
radius-relay Specifies RADIUS relay server subscribers
tunnel Specifies tunnel subscribers
accountor—Accounting method:
none Disables accounting
radius Enables RADIUS accounting
* Indicates that one or more parameters can be repeated multiple times
in a list in the command line