About This Document; New Features; Changes In Default Behavior - Juniper TEPM CONTROLLER - RELEASE NOTES 17-12-10 Release Note

About this Document

This document contains release notes for the Telchemy TePM Controller Release 1.3 for use with
the TePM Agent Release 2.0 or later for the Juniper
release notes are structured as follows:
•
New Features in TePM Controller Release 1.3
•
Changes in default behavior in TePM Controller Release 1.3
•
Issues in the TePM Controller Release 1.3
•
Errata and Documentation Updates in TePM Controller Release 1.3

New Features

The TePM Controller Release 1.3 is the first release of the TePM Controller for use with the
TePM Agent running on Juniper M and MX series routers running Junos OS Release 10.0. The
TePM Controller includes the ability to define a variety of test types, schedule the tests to execute
between two TePM Agents or between a TePM Agent and a target network device/server, and
analyze the test results. The TePM Controller currently supports the following test types:
•
VoIP (SIP signaling)
•
Ping (ICMP Echo)
•
Path diagnostics
•
Trace route
•
DNS
•
DHCP
•
HTTP
•
POP3
•
SMTP
The TePM Controller also provides functionality for assigning TePM Agents licenses and logging
agent/test status information.
All of the data collected by the TePM Controller is stored in a SQL database for trend analysis
and troubleshooting purposes.

Changes in Default Behavior

The TePM Controller Release 1.3 is the first release of the TePM Controller. No change in
default behavior is present.
®
M Series and MX Series Routers. The
- 1 -