Set Ip Source-Prefix - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

set ip source-prefix

[ no ] set ip source-prefix ipAddress ipMask { deny | primary }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a source address range that will be inserted into a specific interface and
Description
the action to take with the range. The no version removes the source address range
from the route map.
Options
Route Map Configuration
Mode
ipAddress IP address for the range
ipMask IP address mask for the range
deny Drops the addresses that appear in the source address range
primary Associates the source prefix with the primary IP interface
Chapter 7: S Commands
493
set ip source-prefix