Ipv6 Ospf Retransmit-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ipv6 ospf retransmit-interval
Syntax
Release Information
Description
Options
Mode
1080
ipv6 ospf [ processId ] retransmit-interval retransInterval
no ipv6 ospf [ processId ] retransmit-interval
Command introduced before JunosE Release 7.1.0.
Specifies the time between LSA retransmissions for the interface when an
acknowledgment for the LSA is not received. The no version restores the default value.
processId—Integer in the range 1–65535
retransInterval—Number in the range 0–3600 seconds; default value is 5 seconds
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers