Ipv6 Ospf Retransmit-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 ospf retransmit-interval

Syntax
Release Information
Description
Options
Mode
1082
ipv6 ospf [ processId ] retransmit-interval retransInterval
no ipv6 ospf [ processId ] retransmit-interval
Command introduced before JunosE Release 7.1.0.
Specifies the time between LSA retransmissions for the interface when an
acknowledgment for the LSA is not received. The no version restores the default value.
processId—Integer in the range 1–65535
retransInterval—Number in the range 0–3600 seconds; default value is 5 seconds
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.