Scrapping Of Robot - ABB CRB 15000 Product Manual

Hide thumbs Also See for CRB 15000:

Table of Contents

8 Decommissioning

8.3 Scrapping of robot

Important when scrapping the robot

The decommissioning process shall be preceded by a risk assessment.

The risk assessment should consider hazards arising in the decommissioning,

such as, but not limited to:

Always remove all oil/grease in gearboxes. If exposed to heat, for example

from a blow torch, the oil/grease will catch fire.

When motors are removed from the robot, the robot will collapse if it is not

properly supported before the motor is removed.

A used robot does not have the same performance as on delivery. Springs,

brakes, bearings, and other parts might be worn or broken.

Product manual - CRB 15000

3HAC077389-001 Revision: L