Table of Contents
Advertisement
IP A
P
DDRESSING AND
ROTOCOL
SHOW IP INTERFACE
show ip interface
Overview
Use this command to display information about interfaces and the IP addresses
assigned to them. To display information about a specific interface, specify the
interface name with the command.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip interface [<interface-list>] [brief]
Syntax
Mode
User Exec and Privileged Exec
Examples
To show brief information for the assigned IP address for interface vlan2 use the
command:
awplus#
Output
Figure 22-8: Example output from the show ip interface brief command
C613-50644-01 Rev B
C
OMMANDS
Parameter
<interface-list> The interfaces to display information about. An interface-list
show ip interface vlan2 brief
Interface
port1.0.1
...
vlan1
...
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
can be:
• a VLAN (e.g. vlan2)
• the loopback interface (lo)
• a continuous range of interfaces separated by a hyphen
(e.g. vlan10-20)
• a comma-separated list (e.g. vlan1,vlan10-20). Do not mix
interface types in a list.
The specified interfaces must exist.
IP-Address
Status
unassigned
admin up
192.168.1.1
admin up
"Getting Started
Guide.
Protocol
down
running
869
Advertisement
Table of Contents
