Spanning-Tree Errdisable-Timeout Interval - Allied Telesis x310-26FT Command Reference Manual

S T C
PANNING REE OMMANDS
- -
SPANNING TREE ERRDISABLE TIMEOUT INTERVAL

spanning-tree errdisable-timeout interval

Overview Use this command to specify the time interval after which a port is brought back
up when it has been disabled by the BPDU guard feature.
Use this command for RSTP or MSTP.
Syntax spanning-tree errdisable-timeout interval <10-1000000>
no spanning-tree errdisable-timeout interval
Default By default, the port is re-enabled after 300 seconds.
Mode Global Configuration
awplus#
Example
awplus(config)#
Related show spanning-tree
Commands
spanning-tree errdisable-timeout enable
spanning-tree portfast bpdu-guard
C613-50103-01 REV A
Parameter Description
<10-1000000> Specify the errdisable-timeout interval in seconds.
configure terminal
spanning-tree errdisable-timeout interval 34
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
575