Show Spanning-Tree Mst Interface - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE MST INTERFACE

show spanning-tree mst interface

Overview This command displays the number of instances created, and VLANs associated
with it for the specified switch port.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show spanning-tree mst interface <port>
Mode User Exec, Privileged Exec, and Interface Configuration
Example To display detailed information about each instance, and all interfaces associated
with them, for port1.0.4, use the command:
awplus#
Output Figure 14-11: Example output from show spanning-tree mst interface
% 1: Bridge up - Spanning Tree Enabled
% 1: CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
% 1: CIST Root Id 80000008c73a2b22
% 1: CIST Reg Root Id 80000008c73a2b22
% 1: CST Bridge Id 80000008c73a2b22
% 1: portfast bpdu-filter disabled
% 1: portfast bpdu-guard disabled
% 1: portfast errdisable timeout disabled
% 1: portfast errdisable timeout interval 1 sec
%
% Instance
% 0:
% 1:
% 2:
613-50157-01 Rev C
Parameter Description
<port>
The port to display information about. The port may be a switch port
(e.g. port1.0.4), a static channel group (e.g. sa2), or a dynamic
(LACP) channel group (e.g. po2).
show spanning-tree mst interface port1.0.4
VLAN
1
2-3
4-5
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
"Getting Started
Guide.
473