Clear Spanning-Tree Detected Protocols (Rstp And Mstp) - Allied Telesis x510-28GTX Command Reference Manual

S T C
PANNING REE OMMANDS
-
CLEAR SPANNING TREE DETECTED PROTOCOLS
clear spanning-tree detected protocols
(RSTP and MSTP)
Overview Use this command to clear the detected protocols for a specific port, or all ports.
Use this command in RSTP or MSTP mode only.
clear spanning-tree detected protocols [interface <port>]
Syntax
Mode Privileged Exec
awplus#
Example
C613-50170-01 Rev B
(RSTP MSTP)
AND
Parameter Description
<port>
The port to clear detected protocols for. The port may be a switch
port (e.g. port1.0.4), a static channel group (e.g. sa2), or a
dynamic (LACP) channel group (e.g. po2).
clear spanning-tree detected protocols
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
626