Switchport Private-Vlan Host-Association - Allied Telesis IE340 Series Command Reference Manual

VLAN C
OMMANDS
-
SWITCHPORT PRIVATE VLAN HOST

switchport private-vlan host-association

Overview Use this command to associate a primary VLAN and a secondary VLAN to a host
port. Only one primary and secondary VLAN can be associated to a host port.
Use the no variant of this command to remove the association.
Syntax switchport private-vlan host-association <primary-vlan-id> add
<secondary-vlan-id>
no switchport private-vlan host-association
Mode Interface Configuration
Examples awplus#
awplus(config)#
awplus(config-if)#
add 3
awplus#
awplus(config)#
awplus(config-if)#
C613-50631-01 Rev A
-
ASSOCIATION
Parameter
<primary-vlan-id>
<secondary-vlan-id>
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
VLAN ID of the primary VLAN.
VLAN ID of the secondary VLAN (either isolated or com­
munity).
switchport private-vlan host-association 2
no switchport private-vlan host-association
670