Show Mirror Interface - Allied Telesis IE340 Series Command Reference Manual

P M R
ORT IRRORING AND EMOTE

SHOW MIRROR INTERFACE

show mirror interface
Overview Use this command to display port mirroring configuration for a mirrored
(monitored) switch port.
show mirror interface <port>
Syntax
Mode User Exec, Privileged Exec and Interface Configuration
Example To display port mirroring configuration for port1.0.2, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Output Figure 13-2: Example output from the show mirror interface command
C613-50631-01 Rev A
M C
IRRORING OMMANDS
Parameter Description
<port>
The monitored switch port to display information about.
configure terminal
interface port1.0.2
Mirror Test Port Name: port1.0.1
Mirror option: Enabled
Mirror direction: both
Monitored Port Name: port1.0.2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
show mirror interface port1.0.2
522