Platform Load-Balancing - Allied Telesis AT-IX5-28GPX Manual

S C
WITCHING OMMANDS
-
PLATFORM LOAD BALANCING

platform load-balancing

Overview This command selects which address fields are used as inputs into the load
balancing algorithm for aggregated links. The output from this algorithm is used
to select which individual path a given packet will traverse within an aggregated
link.
The no variant of this command applies its default setting.
Syntax
platform load-balancing {src-dst-mac|src-dst-ip}
no platform load-balancing
Default The default is src-dst-ip.
Mode Global configuration
Examples To set the load balancing algorithm to include only Layer 2 MAC addresses, enter:
awplus#
awplus(config)#
To set the load balancing algorithm to include only Layer 3 IP addresses and L4
ports, enter:
awplus#
awplus(config)#
Related show platform
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Include the source and destination MAC addresses (Layer 2)
src-dst-mac
Include the source and destination IP addresses (Layer 3).
src-dst-ip
Include the source and destination IP addresses (Layer 3) and
UDP/TCP source and destination ports.
If you choose this option, the algorithm will use MAC addresses
to calculate load balancing for Layer 2 and non-IP packets.
configure terminal
platform load-balancing src-dst-mac
configure terminal
platform load-balancing src-dst-ip
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
375